Panasonic KX-VC1000 Скачать руководство пользователя

Страница: 31 / 228

the cable. When you disconnect the cable, grip
the connector securely and pull it out.

General-purpose microphone

Connect the microphone to the Audio In L/R jack on
the back of the unit using the stereo pin plug cable
(

) after amplifying the signal to line level using a

device such as a microphone amplifier.

•

Connect the microphone correctly, as follows:

–

Left channel

–

Right channel

Note

•

When connecting both the Boundary
Microphone and a general-purpose
microphone, both microphones can be used
simultaneously.

•

When connecting a headset, refer to
"Headset Connection (Page 34)".

Connect to the network.

•

Connect a hub/router to the LAN jack on the
back of the unit using a category 5 or greater
LAN cable (

Note

•

Set the hub/router to Auto Negotiation
mode.

•

Do not connect to a hub/router set to Half
Duplex.

•

For more details about routers and DCEs,
refer to the documentation for each device.

Connect the power cord to the AC adaptor.

•

Use only the power cord included with the unit.

Insert the AC adaptor’s DC cord (

) into the DC IN

terminal on the back of the unit.

•

Use only the AC adaptor included with the unit.

•

Wrap the DC cord around the hook to prevent it
from being disconnected.

Plug in the power cord into the power outlet.

•

Choose an outlet that is convenient for
plugging/unplugging.

System Layout Examples

Display and Main Video Camera

Place the display and main video camera at the same
side of the room.

Note

•

If you use speakers, refer to "Amplifier/Active
Speaker Connection" (Page 35).

Digital Boundary Microphones

Up to 4 Digital Boundary Microphones can be
connected in cascade. There are no separate terminals
for input and output on the Boundary Microphones.
Also, an Analogue Boundary Microphone and
general-purpose microphones can be used
simultaneously.

Note

•

Make sure that the microphones are placed at
least 1 m (3.3 ft) away from the display and
speakers.

Document Version 2018-01

User Manual

Preparation

Содержание KX-VC1000





































































































































































































































Результаты поиска

Содержание KX-VC1000

Отзывы:

Похожие инструкции для KX-VC1000

Бренды по названию

Популярные бренды

Panasonic KX-VC1000, Руководство пользователя

Результаты поиска

Содержание KX-VC1000

Отзывы:

Похожие инструкции для KX-VC1000

Бренды по названию

Популярные бренды