manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 92 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 92

Default Value

Not applicable.

IEEE802.1X Status

Description

Indicates the current status of IEEE 802.1X settings.

Value Range

•

Logoff

•

Disconnected

•

Connecting

•

Authenticating

•

Authenticated

•

Failed (Time Out)

•

Failed

•

Disabled

Default Value

Not applicable.

4.2.3  VoIP Status

This screen allows you to view the current status of each line’s unit.
Clicking 

[Refresh]

 updates the information displayed on the screen.

4.2.3.1  VoIP Status

Line No.

Description

Indicates the line number to which a phone number is assigned 
(reference only).

Note

•

The available line number varies depending on the type of the
unit being used.

Value Range

•

Line 1–Line 4 (for KX-UTG200)

•

Line 1–Line 6 (for KX-UTG300)

Default Value

Not applicable.

92

Administrator Guide

Document Version  2015-01  

4.2.3 VoIP Status

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов