manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 264 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 264

Value Range

Max. 256 characters (except ", &, ', :, <, >, and space)

Default Value

Empty string

ANNEX_G_STUN_PASS

Value Format

String

Description

Specifies the STUN password to be used in computing the
MESSAGE-INTEGRITY attribute used in Binding Requests (only if
message integrity has been requested by the STUN server). When
read, this parameter returns an empty string, regardless of the actual
value.

Value Range

Max. 256 characters (except ", &, ', :, <, >, and space)

Default Value

Empty string

ANNEX_G_STUN_MAX_KEEP_ALIVE

Value Format

Integer

Description

Specifies the maximum period, in seconds, that STUN Binding
Requests must be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This applies specifically to Binding Requests
sent from the UDP Connection Request address and port.

Note

•

This setting is available only when
"

ANNEX_G_STUN_ENABLE

" is set to "

Y

".

Value Range

1–3600

Default Value

30

ANNEX_G_STUN_MIN_KEEP_ALIVE

Value Format

Integer

Description

Specifies the minimum period, in seconds, that STUN Binding
Requests can be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This limit applies only to Binding Requests sent
from the UDP Connection Request address and port, and only those
that do not contain the BINDING-CHANGE attribute.

Note

•

This setting is available only when
"

ANNEX_G_STUN_ENABLE

" is set to "

Y

".

Value Range

1–3600

Default Value

30

264

Administrator Guide

Document Version  2015-01  

5.4.7 Management Server Settings

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов