manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 218 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 218

4.9.6  Status Message

This screen allows you to check the status message of the unit. Click 

[Refresh]

 to refresh the displayed

messages.

4.9.7  Make Call

This screen allows you to make calls from the web user interface using a specified line. This is useful when
you want to perform debugging from a remote site via the web user interface.

4.9.7.1  Make Call

Line No.

Description

Specifies the line to be used when making a call.

Note

•

The available line number varies depending on the type of the
unit being used.

Value Range

•

Line 1–Line 4 (for KX-UTG200)

•

Line 1–Line 6 (for KX-UTG300)

Default Value

Not applicable.

218

Administrator Guide

Document Version  2015-01  

4.9.7 Make Call

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов