manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 185 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 185

4.8.5  KEM Firmware Update

This screen allows you to manually update the firmware of the KX-UTA336 Add-on Key Module from a PC by
clicking 

[Update Firmware]

.

Note

•

After the firmware has been successfully updated, the KX-UTA336 Add-on Key Module will restart
automatically.

4.8.5.1  KEM Firmware Update

File Name

Description

Specifies the path of the firmware file to be imported.

Value Range

No limitation

Note

•

There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.

Default Value

Not stored.

4.8.6  Provisioning Maintenance

This screen allows you to change the provisioning setup to download the configuration files from the
provisioning server of your phone system.

Document Version  2015-01  

Administrator Guide

185

4.8.6 Provisioning Maintenance

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов