Panasonic KX-UTG200 Скачать руководство пользователя страница 151 | Manualshive

Страница: 151 / 412

Panasonic KX-UTG200 Скачать руководство пользователя страница 151

Value Range

•

Max. 32 characters for phone number format

•

Max. 127 characters for URL format (except ", &, ', @, ;, <, >, and
space)

Note

•

You cannot leave this field empty if

[Busy (Enable Call

Forward)]

is set to

[Yes]

.

Default Value

Not stored.

Configuration File Reference

FWD_BUSY_NUMBER (Page 332)

No Answer (Enable Call Forward)

Description

Selects whether to forward incoming calls to a specified destination
when a call is not answered after it has rung a specified number of
times.

Note

•

If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected

[Yes]

for this setting.

•

If you have selected

[Yes]

for this setting and Call Forward has

been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.

•

If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected

[No]

for this setting.

•

You can synchronize the Do Not Disturb and Call Forward from
the Web user interface (

®

see

[Feature Key

Synchronization]

4.6.2.1 Call Control

) or through

configuration file programming (

®

see

"

FEATURE_KEY_SYNCHRO_ENABLE

5.9.2 Per Line - Call

Control Settings

).

•

If you change this setting when

[Feature Key

Synchronization]

is set to

[Yes]

, the change to this setting is

not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

FWD_NO_ANSWER_ENABLE (Page 332)

Document Version 2015-01

Administrator Guide

151

4.6.2 Call Control [Line 1]–[Line n]

«
...
149
150
151
152
153
...
»

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов