manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 147 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 147

4.6.2.3  Call Features

Block Caller ID

Description

Selects whether to make calls without transmitting the phone number
to the called party.

Note

•

Availability depends on your phone system.

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

BLOCK_CALLER_ID (Page 330)

Block Anonymous Call

Description

Selects whether to reject incoming calls that do not show the caller’s
number.

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

BLOCK_ANONYMOUS_CALL (Page 331)

Do Not Disturb

Description

Selects whether to enable the Do Not Disturb feature for incoming calls.

Note

•

If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected 

[No]

 for this setting.

•

If you change this setting when 

[Feature Key

Synchronization]

 is set to 

[Yes]

, the change to this setting is

not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

DND_ENABLE (Page 331)

Return Code When DND

Description

Specifies the return code sent when the unit is in Do Not Disturb mode.

Document Version  2015-01  

Administrator Guide

147

4.6.2 Call Control [Line 1]–[Line n]

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов