manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 144 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 144

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

VM_SUBSCRIBE_ENABLE (Page 326)

Voice Mail Access Number

Description

Specifies the phone number used to access the voice mail server.

Note

•

Your phone system must support voice mail.

Value Range

Max. 32 characters (except ", &, ', @, ;, <, >, and space)

Default Value

Not stored.

Configuration File Reference

VM_NUMBER (Page 327)

Enable Shared Call

Description

Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.

Note

•

You cannot set both 

[Enable Shared Call]

 and 

[Feature Key

Synchronization]

 to 

[Yes]

 at the same time.

•

Availability depends on your phone system.

Value Range

•

Yes

•

No

Note

•

If you select 

[Yes]

, the SIP server will control the line by using

a shared-call signaling method. If you select 

[No]

, the SIP

server will control the line by using a standard signaling method.

Default Value

No

Configuration File Reference

SHARED_CALL_ENABLE (Page 328)

144

Administrator Guide

Document Version  2015-01  

4.6.2 Call Control [Line 1]–[Line n]

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов