manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 116 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 116

Value Range

6–16 characters (except ", &, ', :, <, >, and space)

Note

•

This value must be the same as the value entered in 

[New

Password]

.

Default Value

Not stored.

Configuration File Reference

USER_PASS (Page 245)

4.4.4  Web Server Settings

This screen allows you to change the Web server settings.

4.4.4.1  Web Server Settings

Web Server Port

Description

Specifies the port number used by the Web server.

Value Range

80, 1024–49151

Note

•

You cannot specify here the same port number as any of the
port numbers specified for the individual lines in 

[Source

Port]

 in 

4.5.1.6  SIP Source Port

.

Default Value

80

Note

•

When you change the default value of the port number to a
value other than "80", such as "8080", enter the URL for
accessing the Web user interface using the following format:
"http://192.168.0.100:8080/"
(192.168.0.100: IP address of the unit)

116

Administrator Guide

Document Version  2015-01  

4.4.4 Web Server Settings

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов