Panasonic KX-UTG200, Руководство по установке, Страница: 110 / 412

4.3.7.1 HTTP Client Settings
HTTP Version
Description Selects which version of the HTTP protocol to use for HTTP
communication.
Value Range •
HTTP/1.0
•
HTTP/1.1
Note
•
For this unit, it is strongly recommended that you select [HTTP/
1.0] . However, if the HTTP server does not function well with
HTTP/1.0, try changing the setting [HTTP/1.1] .
Default Value HTTP/1.0
Configuration File Reference HTTP_VER (Page 279)
HTTP User Agent
Description Specifies the text string to send as the user agent in the header of HTTP
requests.
Value Range 1-64 characters
Note
•
You cannot leave this field empty.
•
If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference HTTP_USER_AGENT (Page 279)
4.3.7.2 HTTP Authentication
Authentication ID
Description Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Value Range Max. 127 characters
Default Value Not stored.
110 Administrator Guide Document Version 2015-01
4.3.7 HTTP Client Settings