manualshive.com logo in svg

Panasonic KX-UTG200, Руководство по установке, Страница: 102 / 412

Поделиться
Скачать
Panasonic KX-UTG200 Скачать руководство пользователя страница 102

IPv6 DNS1

Description

Specifies the IPv6 address of the primary DNS server.

Value Range

Max. 46 characters

Default Value

Not stored.

Configuration File Reference

IPV6_STATIC_DNS1_SERVER (Page 273)

IPv6 DNS2

Description

Specifies the IPv6 address of the secondary DNS server.

Value Range

Max. 46 characters

Default Value

Not stored.

Configuration File Reference

IPV6_STATIC_DNS2_SERVER (Page 273)

4.3.4  Ethernet Port Settings

This screen allows you to change the connection mode of the Ethernet ports and the VLAN settings.

Note

•

When you change the settings on this screen and click 

[Save]

, after the message "Save Complete!"

has been displayed, the unit will restart automatically with the new settings applied. If a unit is on a call
when "Save Complete!" has been displayed, the unit will restart after the unit returns to idle.

•

Incorrect settings may cause a network failure. In such a case, you cannot access the Web user
interface anymore. To access it again, you need to correct the speed/duplex settings or perform IP
Reset through phone user interface programming. For details, refer to the Operating Instructions on
the Panasonic Web site (

®

 see 

Introduction

).

102

Administrator Guide

Document Version  2015-01  

4.3.4 Ethernet Port Settings

Содержание KX-UTG200





























































































































































































































































































































































































































Отзывы:

Нет отзывов