Wall Mounting
Before Mounting on a Wall
Mounting the Unit
WARNING
•
Do not mount the unit in a manner other than that described in this section.
•
Make sure that the wall that the unit will be attached to is strong enough to support the unit. If not, it is
necessary for the wall to be reinforced. For information about the weight of the unit, see "Specifications
(Page 87)".
•
Only use the optional wall mount kit with the unit. The wall mount kit includes the necessary screws,
washers, and wall mounting adaptor.
•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths, or metal
plates in the wall.
•
When this unit is no longer in use, make sure to detach it from the wall.
CAUTION
•
Make sure the cables are securely fastened to the wall.
Notice
•
If you place the display face down when you attach the wall mounting adaptor, be sure to place a soft
cloth under the display before attaching the adaptor. Failure to do so may result in damage to the
display.
1.
Insert the 5 tabs of the wall mounting adaptor into the designated openings in the base, and then slide the
wall mounting adaptor in the direction of the arrow until it clicks.
Document Version 2014-11
Operating Instructions
65
Installation and Setup
Содержание KX-UTG200
Страница 64: ...Connections for Handset 64 Operating Instructions Document Version 2014 11 Installation and Setup...
Страница 97: ...Document Version 2014 11 Operating Instructions 97 Notes...
Страница 98: ...98 Operating Instructions Document Version 2014 11 Notes...
Страница 99: ...Document Version 2014 11 Operating Instructions 99 Notes...