Panasonic KX-UT670, Руководство администратора

Страница: 62 / 250

Opening/Closing the Web Port
To access the Web user interface, you must open the unit’s Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (
®
see Introduction ).
Configuring Settings from the Unit
To open the unit’s Web port
1.
Press on the Home screen, and then tap [Settings] .
2.
Tap [Network] and then select [Embedded web] .
3.
Tap [On] .
To close the unit’s Web port
1.
Press on the Home screen, and then tap [Settings] .
2.
Tap [Network] and then select [Embedded web] .
3.
Tap [Off] .
Configuring Settings from the Web User Interface
To close the unit’s Web port
1.
In the Web user interface, click [Web Port Close] .
2.
Click [OK] .
Note
•
The Web port of the unit will be closed automatically in the following conditions:
–
The port close timer configured through the Web user interface expires (
®
see [Port Close
Timer] in 4.5.4.1 Web Server Settings ).
–
3 consecutive unsuccessful login attempts occur.
•
The Web port can be set to stay open continuously, through Configuration file programming (
®
see
"
HTTPD_PORTOPEN_AUTO
" in 5.5.2 HTTP Settings ). However, please recognize the possibility of
unauthorized access to the unit by doing so.
Access Levels (IDs and Passwords)
2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
Account Target User
ID
(default)
Password
(default)
Password Restrictions
User End users user -blank-
(NULL) •
When logged in as User, you can
change the password for the
User account (
®
see
4.5.3 Change User Password ).
•
The password can consist of 6 to
16 ASCII characters
(case-sensitive) (
®
see
Entering Characters in
4.2.4 Accessing the Web User
Interface
).
62 Administrator Guide Document Version 2012-07
Section 4 Web User Interface Programming