manualshive.com logo in svg

Panasonic KX-UT248-B, Руководство администратора, Страница: 90 / 306

Поделиться
Скачать
Panasonic KX-UT248-B Скачать руководство пользователя страница 90

Note

•

If the unit is connected directly to the Internet, or the network global address is static (i.e., does not
change), you do not need to configure Global Address Detection.

4.3.5.1  Global Address Detection

Detection Method

Description

Selects the method to use for detecting the global IP address.

Value Range

•

STUN

•

SIP

Default Value

STUN

Detection Interval

Description

Specifies the interval, in seconds, to wait between attempts to detect
the global IP address.

Value Range

0, 10–65535 (0: Disable)

Note

•

When 

[Detection Method]

 is set to 

[SIP]

, the value "0" disables

detection and a value other than "0" enables detection.

Default Value

0

4.3.5.2  STUN Server

STUN Server Address

Description

Specifies the IP address or FQDN of the STUN server.

Value Range

Max. 127 characters

Default Value

Not stored.

Configuration File Reference

STUN_SERV_ADDR (Page 200)

90

Administrator Guide

Document Version    2012-06

4.3.5 Global Address Detection

Содержание KX-UT248-B



















































































































































































































































































































Отзывы:

Нет отзывов