Panasonic KX-UT248-B, Руководство администратора, Страница: 130 / 306

Do Not Disturb
Description Selects whether to enable the Do Not Disturb feature for incoming calls.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected
[No] for this setting.
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes] , the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range •
Yes
•
No
Default Value No
4.6.2.4 Call Forward
Unconditional (Enable Call Forward)
Description Selects whether to forward all incoming calls to a specified destination.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected
[Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected
[No] for this setting.
•
You can synchronize the Do Not Disturb and Call Forward
settings from the Web user interface (
®
see [Synchronize Do
Not Disturb and Call Forward] in 4.6.2.1 Call Control ) or
through configuration file programming (
®
see
"
FWD_DND_SYNCHRO_ENABLE_n
" in 5.7.1 Call Control
Settings ).
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes] , the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range •
Yes
•
No
Default Value No
130 Administrator Guide Document Version 2012-06
4.6.2 Call Control [Line 1]–[Line x]