Panasonic KX-UT123, Руководство администратора

Страница: 204 / 312

Value Range 0–3
–
0: Enable "Basic Network Settings" and "Time Adjust Settings"
–
1: Disable "Basic Network Settings"
–
2: Disable "Time Adjust Settings"
–
3: Disable "Basic Network Settings" and "Time Adjust Settings"
Default Value 0
5.4.9 LLDP-MED Settings
LLDP_ENABLE
Value Format Integer
Description Selects whether to enable or disable sending and receiving LLDP
frames.
Note
•
This setting is available only when "
NW_SETTING_ENABLE
" is
set to "
N
".
•
You should specify "
Y
" for only one of "
LLDP_ENABLE
",
"
VLAN_ENABLE
", or "
IEEE8021X_ENABLE
".
If "
Y
" is specified for two or more of the parameters above, the
settings are prioritized as follows: IEEE8021X_ENABLE >
VLAN_ENABLE > LLDP_ENABLE. Therefore, if "
Y
" is specified
for both "
VLAN_ENABLE
" and "
LLDP_ENABLE
", the
VLAN-related settings are used.
Value Range •
Y
: Enable
•
N
: Disable
Default Value Y
LLDP_INTERVAL
Value Format Integer
Description Specifies the interval, in seconds, between sending each LLDP frame.
Value Range 1–3600
Default Value 30
LLDP_VLAN_ID_PC
Value Format Integer
Description Specifies the VLAN ID for the PC port when LLDP is on.
Value Range 0–4094
Default Value 0
204 Administrator Guide Document Version 2013-03
5.4.9 LLDP-MED Settings