Panasonic KX-TVP200, Руководство по установке

Страница: 277 / 408

SYSTEM ADMINISTRATOR'S GUIDE
Installation Manual 277
Other Parameters-Fax Management
You can program the VPS to automatically forward incoming fax calls to a fax extension. You
can specify a maximum of 2 fax extensions as the destination for the Automatic Fax Transfer.
If the main fax extension is not available to receive a fax, the VPS will forward the fax
transmission to the alternate fax extension.
Paging Code
for Group 1-16 Up to 12 digits
consisting of
0-9, ,# for each
group
(Group 1-16:
331-338;
All Groups
[Group 17]: 33 )
Specifies the intercom paging access code required by
the PBX.
Note: The Intercom Paging Group Number available
for each subscriber is determined on a COS-by-COS
basis.
Paging Code
for All Groups
To access the proper menu for Fax Management, follow the menu path as shown:
System Administration Top Menu-1-5-7-8
Table 67
Parameter Value Range
(Default)
Description/Function
Automatic
Transfer of
Incoming Fax
Call 1: Disable
2: Enable
(Disable)
Enables or disables the Automatic Transfer of Incoming
Fax Call Service.
Note: Automatic detection works for only the first 30s.
Main Fax
Extension No. 2-5 digits
(None)
Specifies the main fax extension number.
Alternate Fax
Extension No. 2-5 digits
(None)
Specifies the alternate fax extension number. When the
main fax extension is busy or does not answer within the
specified "Fax No Answer Time", the VPS forwards the
fax call to the alternate fax extension.
Table 66
Parameter Value Range
(Default)
Description/Function