Panasonic KX-TVM50, Руководство по программированию

Страница: 26 / 200

1.8 Utility
26 Programming Guide
3.
Select the desired WAV file.
4.
Click Open to import the file.
5.
Click OK.
1.8.4 Utility—Line Status
The System Administrator can confirm the condition of each port and turn on/off VPS Call
Progression Mode.
Follow the steps below to use the Line Status utility:
1.
Click Utility in the menu bar.
2.
Select Line Status.
(You can click the icon in the tool bar instead of step 1 and 2.)
The Line Status screen includes the Port Activity List which displays each port's status and
number, as well as the current setting of Port Parameters. The screen will be updated every 2
seconds. Each port's status will be displayed as follows:
a)
"Ready": The port is ready to be used.
b)
"Incoming Call": The port is handling an incoming call.
c)
"Outgoing Call": processing sending service
d)
"DSP Reset": processing DSP reset disposition
e)
"PT Connect": processing PT connect disposition
f)
"Off line": Off Line Mode
[Turning on VPS Call Progression Mode]
1.
Select the desired port and click Open Line.
[Turning off VPS Call Progression Mode]
1.
Select the desired port and click Close Line.
2.
Select "Close immediately" or "Wait for end of activity".
3.
Click OK.
3.
Click Close.
1.8.5 Utility—System Trace
The System Administrator can monitor VPS activities and log the activities into a separate file. The
following data can be logged for each port or all ports:
a)
DTMF/Dial: DTMF signals sent and received by the VPS.
b)
Guidance: guidance data that the VPS played.
c)
Message: the VPS activity on messages such as creating, playing and deleting.
d)
Process Event: events occurred between the VPS processes such as Application, Call
Processor and DSP.
e)
Caller ID: Caller ID received from the PBX.
f)
Error: system errors
Follow the steps below to setup a System Trace file: