manualshive.com logo in svg

Panasonic KX-TVM50, Руководство по установке

Поделиться
Скачать
Panasonic KX-TVM50 Скачать руководство пользователя страница 145

5.5  KX-TD Series PBX Programming for Inband Inte-
gration

For KX-TD500 programming, refer to 5.6  KX-TD500 PBX Programming for Inband Integration.
DPT Integration is recommended when using the VPS with the KX-TD612, KX-TD816, or KX-TD1232,
however, Inband Integration is necessary when the software version of the PBX does not support DPT
Integration.

Programming procedures and availability may vary by country/area, software version, etc. Refer to the
documentation included with the PBX or consult your dealer for more information.

5.5.1  KX-TD Series PBX Programming via the Manager’s Exten-
sion

For KX-TD500 programming, refer to 5.6  KX-TD500 PBX Programming for Inband Integration.
Select a maximum of 2 extension ports to be connected to the VPS. Plug each extension into a Voice Mail
port.
Go to System Program 

[602]

 and assign the Voice Mail extensions to a different extension group. By default,

all extensions are in Extension Group 1.
Go to System Program 

[106]

 and assign the new Extension Group to Automated Attendant (AA).

5.5.2  KX-TD Series PBX Programming via the Operating and Main-
tenance Tool

For KX-TD500 programming, refer to 5.6  KX-TD500 PBX Programming for Inband Integration.

1.

Go to the 

Main Menu

. Select 

System Data Programming

 (BATCH [1] or INTERACTIVE [2]).

•

Before choosing BATCH, you must open a file in the Disk File Management Menu (Item 3).

•

Before choosing INTERACTIVE, you must connect with the system in the DSHS Connect/
Disconnect menu.

Main Menu

1. System Data Programming (BATCH)
2. System Data Programming (INTERACTIVE)
3. Disk File Management
4. DSHS Management
5. DSHS Connect/Disconnect
6. Quit
      Select the number :  [   ]

2.

Select 

Station

 from the 

System Data Programming Main Menu

.

3.

Select 

Station Setting

 or 

Station Setting 1

 from the 

Station Menu

.

4.

Enable XDP ports. Additionally, you may need to place Voice Mail extensions in an Extension Group.

Note

•

The following steps are divided into parts "a" and "b". Follow the procedure described in "a" or "b"
according to the items displayed on the screen.

5.

a.

Return to the 

System Data Programming Main Menu

. Select 

System

.

b.

Return to 

Station

. Select 

Hunting Group Setting 1

.

6.

Document Version  2.1  2008/04

Installation Manual

145

5.5.2 KX-TD Series PBX Programming via the Operating and Maintenance Tool

Содержание KX-TVM50









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды