Panasonic KX-TVM200, Руководство по программированию

Страница: 113 / 200

2.5 System Parameters
Programming Guide 113
PBX Type
Specifies the type of PBX connected to the VPS.
Value Range
TDA, TD816/TD1232, TD500, TD308, TD612, TA/TE series, T308/616, T1232, T96, T336, Other
Manufactures
*1
Integration Mode
Specifies the method of integrating the VPS with the PBX.
Value Range
Inband: The PBX sends DTMF signals to the VPS to indicate the status of calls (busy, answered,
disconnect, etc.). The DTMF code for each status must be set in the Inband Signalling Parameters;
the settings of the PBX and VPS must match. If the PBX type is set to a KX-T series PBX, the Inband
Signalling Parameters will automatically default to the proper codes. This is available with any of the
following Panasonic KX-T series PBXs: TA/TE series, TD816, TD1232, TD500, TD612, and TDA
series.
DPT: The VPS communicates with the PBX via the DPT interface. This is available with any of the
following Panasonic KX-T series PBXs: TD816, TD1232, TD500, TD308, TD612, and TDA series.
APT: The VPS communicates with the PBX via the APT Interface. This is available with any of the
following Panasonic KX-T series PBXs: KX-TA/TE series.
Feature Guide References
2.1.1 APT Integration
2.1.3 DPT Integration
2.1.4 Inband Integration
Maximum Extension Number Length
Specifies the number of maximum digits which the connected PBX recognises as an extension
number.
Value Range
2–5 digits
Extension Number of VPS Port 1–6 (KX-TVM50), 1–24 (KX-TVM200)
Specifies the PBX extension number of the port connected to the VPS. When configuring the VPS
via the Auto Configuration feature, this parameter is set automatically.
Value Range
2–5 digits
*1 The value range varies depending upon Country/Area and VPS model (KX-TVM50/KX-TVM200). Consult your dealer for more details.