Panasonic KX-TVA50, Руководство по функциям

Страница: 42 / 87

2.3 Subscribers Features
42 Feature Manual
2.3.2 Automatic Log-in (APT/DPT Integration Only)
Description
Allows subscribers to log in to their mailbox directly without entering the mailbox number. A subscriber
can log in to his or her mailbox directly by:
– dialing an extension number of the VPS from his or her extension
– dialing (from an outside telephone) the DID number assigned to log him or her into the mailbox
– calling the VPS from a telephone number that is assigned to log him or her into the mailbox
– calling the VPS so that the call is received on the trunk (CO line) assigned to log him or her into
the mailbox
Conditions
• This feature can be enabled or disabled for each mailbox by the System Administrator.
• The access from outside phones will be enabled automatically after Caller ID numbers, DID
number or trunk (CO line) number are assigned. The trunk (CO line) numbers and DID number
can be assigned by the System Administrator only.
• When this feature is activated, "Toll Saver" is also available.
• DID number setting for this feature is only available for the following PBXs using DPT Integration.
– KX-TD816 (P311Q or higher)
– KX-TD1232 (P211Q or higher)
– KX-TD500 (V4M or higher)
– KX-TDA series* (MPR Version 1.1 or higher)
* except KX-TDA50
Programming Manual References
2.1.10 Automatic Log-in
"Toll Saver" in 2.4.3 Parameters
Feature Manual References
2.3.31 Toll Saver (APT/DPT Integration Only)
Subscriber's Manual References
5.16 Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
2.3.3 Autoplay New Message
Description
Enables the VPS to play new messages automatically when a subscriber or the System Manager/
Message Manager logs into his or her mailbox. There is no need to press [1] to receive the new
messages. If there is more than one new message in the mailbox, they will be played continuously
without system prompts. The Subscriber's Service Top Menu will be heard after all of the messages
are played.