Panasonic KX-TVA200, Руководство по установке

Страница: 121 / 208

4.6 KX-TA Series PBX Programming for APT Integration
Installation Manual 121
4.6 KX-TA Series PBX Programming for APT
Integration
For KX-TA824 programming via the Operating and Maintenance Tool, refer to 4.3 KX-TA824 PBX
Programming for APT Integration.
For KX-TA1232 programming, refer to 4.4 KX-TD Series PBX Programming for DPT Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer
to the documentation included with the PBX or consult your dealer for more information.
Note
• The KX-TA824 can also be programmed via PC using the Operating and Maintenance Tool.
Refer to 4.3 KX-TA824 PBX Programming for APT Integration.
• For KX-TA824, PBX software version 1.0.44 or later is required for APT Integration. Consult
your dealer for more information.
It is important that the PBX has the proper software level to allow APT Integration with the VPS.
Follow the procedures below to confirm the software level, then complete the required programming
before starting up the VPS.
All of the following procedures must be completed after entering system programming. Refer
to the KX-TA series Installation Manual for instructions on how to enter the system
programming mode.
1.
Using the Manager Extension, check the software version of the KX-TA series PBX using System
Program [998].
Example:
Y581J000421 (XX)
The underlined digits represent the software production date code (year, month, day). For APT
Integration, the production date must be 000421 or later.
If the software version of the PBX is lower than this, consult your dealer.
From the SYS-PGM NO ? screen:
a)
Enter [998] .
b)
Press the NEXT button (SP-PHONE). The PBX displays the ROM version and the date it
was created.
2.
Set the date and time using System Program [000] .
Date and time are automatically synchronized between the VPS and the PBX during Quick
Setup.
3.
Set extension numbering using System Program [009] .
4.
Assign the voice mail port. This program tells the PBX which jacks will be connected to the VPS.
This allows the PBX to send the proper APT Integration information to those ports. Jack 07, or
jacks 07 and 08 can be assigned for the VPS1 as the
voice mail port . Jack 15, or jacks 15 and
16 can be assigned for the VPS2.