Panasonic KX-TPA73 Скачать руководство пользователя страница 112

Страница: 112 / 161

9.1 Installation and Setup

Note

• Panasonic assumes no responsibility for injuries or property damage resulting from

failures arising out of improper installation or operation inconsistent with this
documentation.

WARNING

• To reduce the risk of fire or electric shock, do not overload AC outlets and extension

cords.

• Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may

cause electric shock and/or excessive heat resulting in a fire.

• Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the

power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.

9.2 Connections

KX-TGP700 (Base unit)

Connect the AC adaptor and the Ethernet cable to the base unit.

Hub

PNLV236xx

• Check the label color of the AC adaptor cord and the label color nearby DC jack of the

KX-TGP700. The color of the label must match the AC adaptor cord for the
KX-TGP700.

• If PoE is available, an AC adaptor is not needed.

• If you are using a PoE hub, the number of devices that you can connect simultaneously

is limited by the amount of power supplied by the hub.

9.1 Installation and Setup

112

Содержание KX-TPA73


































































































































































Результаты поиска

Содержание KX-TPA73

Отзывы:

Похожие инструкции для KX-TPA73

Бренды по названию

Популярные бренды

Panasonic KX-TPA73, Руководство по эксплуатации

Результаты поиска

Содержание KX-TPA73

Отзывы:

Похожие инструкции для KX-TPA73

Бренды по названию

Популярные бренды