Connecting to the Base Unit or to another Computer
For assistance, please visit http://www.panasonic.com/phonehelp
17
Establishing a wireless
connection with the base
unit or another computer
By connecting with the base unit, you can:
– access the Internet via the base unit
using the PAN or DUN service.
– establish a wireless connection with
your LAN network via the base unit
using the PAN service.
By connecting with another computer
using an additional USB adaptor or a
Bluetooth device, you can share the
computer files using the PAN service.
1
Connect the USB adaptor to your
computer.
L
The MULTI TALK V USB Utility starts.
If the software does not start, refer to
the troubleshooting section (page
18).
2
Click the Data Link Manager icon in the
MULTI TALK V USB Utility-Main Menu
window.
L
Data Link Manager window is open.
L
All registered devices are listed in the
Device List.
3
Select the device you would like to
connect to.
L
All available services are listed in the
Service List.
4
Select the desired service, then click
[Connect]
.
L
The animation in the lower left corner
of the Data Link Manager screen
indicates that the connection is
established.
L
If you close the Data Link Manager
window, the current connection is
disconnected.
Disconnecting a wireless
connection
1
Open the Data Link Manager.
L
If the MULTI TALK V USB Utility is
minimized, click the MULTI TALK V
USB Utility icon in the system tray.
2
Click
[Disconnect]
.
3
Click
[Yes]
when prompted.
THA14(e).book Page 17 Tuesday, March 7, 2006 5:31 PM