Panasonic KX-TGP600, Руководство по эксплуатации

Страница: 58 / 112

a parked call using the soft key, the Call Park Retrieve feature number must be set beforehand.
Contact your administrator for further information.
Talking to Two Parties Alternately (Call Splitting)
When talking to one party while the other party is on hold, you can swap the calls back and forth
(alternately).
To call a third party and then alternate between the two
1. KX-TPA60:
/ /[HOLD/MSG]
KX-TPA65:
/ /[HOLD]
2. Dial the other party’s extension number.
3. After talking to the other party, press
KX-TPA60:
/ /[HOLD/MSG]
KX-TPA65:
/ /[HOLD]
4. Talk to the original party.
Three-party Conference
During a conversation, you can add an additional party to your call and establish a conference call.
Note
R Your phone system may support advanced conference features, such as conference calls with four or
more parties. In this case, the procedures for handling a conference call may be different from those
explained in this section. For details, contact your phone system dealer/service provider.
Making a Conference Call
1. /[FUNC]/[FUNCTION] during a conversation. a "Conference"
2. Dial the party you want to add to the conversation. a
CALL
3.
CONF
/
Note
R The
CONF
/ soft key can also be used to access the Conference function directly. To display
this key, edit the displayed soft keys. For details, see “Key Option”, Page 93.
R When using a KX-TPA65, /[CONF] can also be used at steps 1 and 3.
Removing a Party from the Conference (when connected to the KX-TGP600 only)
During a conference, you can remove other parties from the conference. However, this operation is
available only during conference calls you initiate.
1. During a conference call, press
KX-TPA60:
/ /[HOLD/MSG]
KX-TPA65:
/ /[HOLD]
2. /[LINE]
58
During a Conversation