Panasonic KX-TGJ324EB, Руководство по эксплуатации

Страница: 32 / 56

Storing unwanted callers
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
n From the caller list:
1
MCN CID
2
MbN : Select the entry to be blocked. a
M MENU N
3
MbN : “ Save Call Block ” a M OK N
4
MbN : “
Yes
” a M OK N a M OFF N
n By entering phone numbers:
1
M MENU N (right soft key) #217
2
MbN : “ Single Number ” a M OK N
3
M MENU N a MbN : “
Add
” a M OK N
4
Enter the phone number (24 digits max.).
R To erase a digit, press M CLEAR N .
5
M OK N a M OFF N
Storing a range of numbers
1
M MENU N (right soft key) #217
2
MbN : “
Range of Numbers
” a M OK N
3
M MENU N a MbN : “
Add
” a M OK N
4
Enter the desired number (2-8 digits).
R To erase a digit, press M CLEAR N .
5
M OK N a M OFF N
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers.
1
M MENU N (right soft key) #240
2
MbN : Select the desired setting. a M OK N
3
M OFF N
Viewing/editing/erasing call
block numbers
1
M MENU N (right soft key) #217
2
MbN : “
Single Number
” or “
Range of
Numbers
” a M OK N
3
MbN : Select the desired entry.
R To exit, press M OFF N .
4
To edit a number:
M EDIT N a Edit the number. a M OK N a
M OFF N
To erase a number:
M ERASE N a MbN : “
Yes
” a M OK N a
M OFF N
Note:
R When editing, press the desired dial key to
add digits and press
M CLEAR N to erase
digits.
Erasing all call block numbers
1
M MENU N (right soft key) #217
2
MbN : “
Single Number
” or “
Range of
Numbers
” a M OK N
3
M MENU N a MbN : “
Erase All
” a M OK N
4
MbN : “
Yes
” a M OK N
5
MbN : “ Yes ” a M OK N a M OFF N
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby’s room, for example) will
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
R You should perform a test run of the baby
monitor procedure to ensure that the baby
monitor feature is set correctly. For
example, test its sensitivity. Check the
connection if you are diverting the baby
monitor to an outside line.
R This feature should not be used as a
substitute for a medical or caregiver’s
supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
32 Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Programming
TGJ32xE(en)_0305_ver011.pdf 32 2015/03/05 14:31:40