Answering system
Problem
Cause/solution
The unit does not record new
messages.
R
The answering system is turned off. Turn it on (page 49).
R
The answering system does not answer or record calls
from cellular lines.
R
The message memory is full. Erase unnecessary
messages (page 50).
R
The recording time is set to
“
Greeting only
”
. Change
the setting (page 55).
R
Your service provider/telephone company’s Voice Mail
service may be answering your calls before the unit’s
answering system can answer your calls. Change the
unit’s number of rings setting (page 54) to a lower value,
or contact your service provider/telephone company.
R
The answering system will not answer incoming calls
while the other devices such as headset or handsets are
engaged in a call.
I cannot operate the answering
system remotely.
R
The remote access code is not set. Set the remote
access code (page 53).
R
You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 53).
R
The answering system is turned off. Turn it on (page 54).
R
You cannot operate the answering system when calling a
cellular phone paired to the base unit.
The unit does not emit the
specified number of rings.
R
If the first ring is turned off, the number of rings decreases
by 1 from the specified number of rings.
Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R
Change the PIN using the following method.
1
M
MENU
N
(right soft key)
#619
2
*7000
3
Enter the new 4-digit PIN.
a
M
OK
N
4
Enter the new 4-digit PIN again.
a
M
SAVE
N
a
M
OFF
N
65
Useful Information
TGH26xC(en)_1224_ver013.pdf 65
2013/12/24 14:29:42
