Answering system
Problem
Cause/solution
The unit does not record
new messages.
R
The answering system is turned off. Turn it on (page 52).
R
The answering system does not answer or record calls from
mobile lines.
R
The message memory is full. Erase unwanted messages
(page 53).
R
The recording time is set to
“
Greeting Only
”
. Change the
setting (page 58).
R
Your service provider/telephone company’s voice mail service
may be answering your calls before the unit’s answering
system can answer your calls. Change the unit’s number of
rings setting (page 57) to a lower value, or contact your service
provider/telephone company.
R
The answering system will not answer incoming calls while the
other devices such as headset or handsets are engaged in a
call.
I cannot operate the
answering system
remotely.
R
The remote access code is not set. Set the remote access
code (page 56).
R
You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 56).
R
The answering system is turned off. Turn it on (page 57).
R
You cannot operate the answering system when calling a
mobile phone paired to the base unit.
The unit does not emit the
specified number of rings.
R
If the first ring is turned off, the number of rings decreases by 1
from the specified number of rings.
Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R
Change the PIN using the following method.
1
M
N
(right soft key)
#619
2
*7000
3
Enter the new 4-digit PIN.
a
M
OK
N
4
Enter the new 4-digit PIN again.
a
M
OK
N
a
M
N
67
Useful Information
TGH260BX_UE(en)_0806_ver021.pdf 67
2014/08/06 15:12:51
