R
2 way recording is not available during
conference calls.
R
The recording will end in the following situations:
– When
M
FLASH
N
is pressed.
– When the hold or intercom feature is used.
R
When memory is/becomes full:
–
“
Memory full
”
is shown on the display.
– An error tone sounds.
Call share
You can join an existing outside call.
n
While another unit is on a cellular call:
1
To join the conversation, press
M
CELL
N
.
R
You can join the conversation in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 20).
2
MbN
: Select the corresponding cellular
phone.
a
M
SELECT
N
n
While another unit is on a landline call:
To join the conversation, press
M
N
.
Note:
R
A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.
(3-way conference)
R
To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 50).
R
A 2nd party cannot join an outside call that is
being recorded (page 23).
Transferring calls, conference calls
Outside calls can be transferred or a conference
call with an outside party can be made:
– between handsets
– between a handset and the base unit
1
During an outside call, press
M
MENU
N
.
2
MbN
:
“
Intercom
”
a
M
SELECT
N
3
MbN
: Select the desired unit.
a
M
SELECT
N
R
If you select
“
Voice paging
”
, the call will
be switched from the ear-receiver mode to
the speakerphone mode.
4
Wait for the paged party to answer.
R
If the paged party does not answer, press
M
BACK
N
to return to the outside call.
5
To complete the transfer:
Press
M
OFF
N
.
To establish a conference call:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To leave the conference, press
M
OFF
N
. The
other 2 parties can continue the
conversation.
R
To put the outside call on hold:
M
MENU
N
a
MbN
:
“
Hold
”
a
M
SELECT
N
To resume the conference:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To cancel the conference:
M
MENU
N
a
MbN
:
“
Stop conference
”
a
M
SELECT
N
You can continue the conversation with the
outside caller.
Transferring a cellular call between
the handset and a cellular phone
Transferring a cellular call from the handset to
a cellular phone
1
Press
M
MENU
N
during a cellular call.
2
MbN
:
“
Transfer to cell
”
a
M
SELECT
N
R
The cellular call is transferred to the cellular
phone.
Note:
R
Depending on your cellular phone type, you
may need to set the cellular phone to be ready
to talk before transferring. For example, if your
cellular phone has a top cover, open it
beforehand.
Transferring a cellular call from a cellular
phone to the handset
During a conversation using a cellular phone, the
call cannot be transferred to the handset by the
cellular phone. Perform the following with the
handset.
1
During a conversation using a cellular phone,
press
M
CELL
N
.
R
The call is transferred to the handset in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular calls
(page 20).
2
MbN
: Select the corresponding cellular phone.
a
M
SELECT
N
R
The call is transferred to the handset.
24
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
TGF88x(en)_1104_ver033.pdf 24
2019/11/05 13:22:53
