Panasonic KX-TGF740, Руководство по эксплуатации

Страница: 20 / 76

Making an intercom call
Handset
1
M MENU N a MbN : “
Intercom
” a
M SELECT N
2
MbN : Select the desired unit or “
Voice
paging ” . a M SELECT N
R If you select “
Voice paging
” , speak
into the microphone after the beep.
Your voice will be heard using the
speakers of the base unit and all
handsets, until a paged party answers
your page or until you press
M OFF N .
After the other party answers, the
speakerphone mode is turned on.
3
When you finish talking, press M OFF N .
Note:
R You can also use the M INTERCOM N soft
key, if displayed, to make intercom calls.
R You cannot use voice paging if other units
are in use.
Base unit
1
Press M INTERCOM N .
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
When you finish talking, press MZN .
Answering an intercom call
Handset
1
Press M N to answer the page.
2
When you finish talking, press M OFF N .
Base unit
1
Press MZN to answer the page.
2
When you finish talking, press MZN .
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
called. You do not need to press
M N or
MZN . When this feature is set to “
On
” , the
monitoring handset or base unit for the baby
monitor feature (page 45) will also answer
baby monitor calls automatically. The default
setting is
“ Off ” .
Handset / Base unit
1
M MENU N#273
2
MbN : Select the desired setting. a
M SAVE N
3
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Note:
R This feature is not available for all handsets
paging and voice paging even if it is turned
on.
Power backup operation
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. However, some
functions such as Caller ID and phonebook
are available only when using a handset other
than the handset supplying power to the base
unit. You can program
“
Power failure
”
and the default setting is “
Auto
” (page 38).
Important:
R If a handset is not placed on the base unit
when a power failure occurs,
“
Power
outage Press OFF ” is displayed. After
pressing M OFF N on the handset, place it on
the base unit to start power backup mode.
R Power backup mode will not work if the
battery level of the power supplying
handset is or .
20 For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls
TGF74xUSA_OI_0416_ver211.pdf 20 2020/04/16 8:51:25