Panasonic KX-TGF370 Series Скачать руководство пользователя | Manualshive

Страница: 72 / 88

background image

Error messages

Display message

Cause/solution

Ask phone
company for
VM access #

R

You have not stored the voicemail access number.
Store the number (page 69).

Base no power

or

No link. Re-
connect base
AC adaptor.

or

No link.

R

Confirm the base unit’s AC adaptor is connected to
the unit and the power outlet correctly.

R

The handset has lost communication with the base
unit. Move closer to the base unit and try again.

R

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

R

The handset’s registration may have been cancelled.
Re-register the handset (page 52).

R

When

“

No link.

”

is displayed during a power

failure, place a handset on the base unit to supply
power to the base unit.

Busy

R

No cellular phone is paired to the base unit. Pair a
cellular phone (page 16).

R

The called unit is in use.

R

Other units are in use and the system is busy. Try
again later.

R

The handset you are using is too far from the base
unit. Move closer and try again.

R

Only 2 Bluetooth devices can be used with the unit at
the same time (for example, 2 cellular lines, or the
headset and 1 cellular line).

Check tel line

R

The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).

R

If you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 18).

Error!!

R

Recording was too short. Try again.

R

Someone is using a cellular line or headset. Try
again later.

R

The phonebook copy is incomplete (page 57). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.

Failed

R

Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try

again later.

– Make sure that the cellular phone or headset is

not connected to other Bluetooth devices.

72

For assistance, visit www.panasonic.ca/english/support

Useful Information

TG175CSK(en)_0324_ver011.pdf 72

2016/03/24 9:06:21

«
...
70
71
72
73
74
...
»

Содержание KX-TGF370 Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для KX-TGF370 Series

Бренд: Swyx Страницы: 4

Бренд: Main Resource Страницы: 5

Бренд: Uniden Страницы: 52

DECT1725 Series

Бренд: Uniden Страницы: 44

Бренд: Northland Страницы: 7

Бренд: GE Страницы: 18

Бренд: switel Страницы: 120

Бренд: HC Telecom Страницы: 16

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 1

Бренд: Emerson Страницы: 9

Бренд: Emerson Страницы: 9

Бренд: Uniden Страницы: 76

Бренд: Huawei Страницы: 125

Бренд: Radio Shack Страницы: 68

Бренд: Philips Страницы: 2

Бренд: Siemens Страницы: 269

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды