background image

Limited Warranty (ONLY FOR U.S.A.)

Limited Warranty Coverage (For USA Only)

Labor

One (1) Year

Parts

One (1) Year

To submit a new repair request and for quick repair status visit our Web Site at
http://shop.panasonic.com/support

Panasonic Products Limited Warranty

Online Repair Request

Mail-In Service--

Online Repair Request

If your product does not work properly because of a defect in materials or workmanship, 
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length 
of the period indicated on the chart below, which starts with the date of original purchase 
(“warranty period”), at its option either (a) repair your product with new or refurbished parts,
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your 
purchase price. The decision to repair, replace or refund will be made by the warrantor.

During the “Labor” warranty period there will be no charge for labor. During the “Parts” 
warranty period, there will be no charge for parts. This Limited Warranty excludes both 
parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). 
This warranty only applies to products purchased and serviced in the United States.
This warranty is extended only to the original purchaser of a new product which was 
not sold “as is”.

Telephone

When shipping the unit, carefully pack, include all supplied accessories listed in the 
Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. 
When shipping Lithium Ion batteries please visit our Web Site at 
http://shop.panasonic.com/support as Panasonic is committed to providing the most up to 
date information. Include a letter detailing the complaint, a return address and provide a 
daytime phone number where you can be reached. A valid registered receipt is required 
under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL 
BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING 
DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL 
BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF 
OF PURCHASE.

Product or Part Name

80

For assistance, please visit http://shop.panasonic.com/support

Appendix

Содержание KX-TGD890





















































































Отзывы: