Panasonic KX-TGD620 Series, Руководство по эксплуатации

Страница: 32 / 56

3
MbN : Select “
External
” to monitor
from an outside line. a M EDIT N a
M ADD N
4
MbN : “
Manual
” a M OK N
5
Enter the desired name. a M OK N
6
Enter the desired number. a M OK N 2
times
R “
Baby Monitor
” will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to
“
On
” .
1
Press M MENU N on the handset being
monitored.
2
MbN : “ On/Off ” a M OK N
3
MbN : “
Off
” a M OK N a M OFF N
Editing an outside monitoring number
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M OK N
3
MbN : “
On
” a M OK N
4
MbN : Select the outside line. a M EDIT N
5
M MENU N a MbN : “
Edit
” a M OK N
6
Edit the name if necessary. a M OK N
7
Edit the phone number if necessary. a
M OK N 2 times
Erasing an outside monitoring
number
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M OK N
3
MbN : “
On
” a M OK N
4
MbN : Select the outside line. a M EDIT N
5
M MENU N a MbN : “
Erase
” a M OK N
6
MbN : “
Yes
” a M OK N a M OFF N
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1
Press M MENU N on the handset being
monitored.
2
MbN : “ Sensitivity Level ” a M OK N
3
MbN : Select the desired setting. a M OK N
a M OFF N
Answering the baby monitor
n
When monitoring with a handset:
Press M N to answer calls.
If you want to respond from the monitoring
handset, press
M MUTE N .
R The monitoring handset will answer calls
automatically when the auto intercom
feature is set to
“ On ” (page 19).
Note:
R If you receive an outside call when
communicating with the monitored
handset, the interrupt tone sounds. To
answer the call, press
M OFF N , then press
M N .
n When monitoring from an outside line:
Answer the call.
If you want to respond from your monitoring
phone, press
#1 using tone dialling.
You can turn off the baby monitor feature
by pressing
#0 .
Note:
R The unit disconnects the call
automatically after 2 minutes.
Other programming
Changing the handset name
The default handset name is “
Handset 1
” to
“ Handset 6 ” . You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
32 Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Programming
KX-TGD62xE(en)_0319_ver023.pdf 32 2018/03/19 10:02:49