Setting up
Connections
R
If you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 18).
n
Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R
Use only the supplied Panasonic AC
adaptor PNLV226.
1
3
2
4
3
n
Charger
Connect the AC adaptor to the power
outlet.
1
Battery installation
R
USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R
Do NOT use alkaline/manganese/Ni-Cd
batteries.
R
Confirm correct polarities (
,
).
1
4
2
3
1
R
Follow the directions on the display to set
up the unit.
10
For assistance, visit www.panasonic.ca/english/support
Getting Started
KX-TG273CSK̲(en-en)̲0525̲ver110.pdf 10
2018/06/02 10:39:09
