Important:
R
Before using this feature, we recommend
that you test this feature and adjust the
baby monitor sensitivity as needed,
especially if you plan to monitor from
outside.
R
This feature should not be used as a
substitute for a medical or caregiver’s
supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
Note:
R
During the monitoring mode, battery
consumption is faster than usual. We
recommend leaving the monitored handset
on the base unit.
R
The monitored handset never rings while it
is being monitored.
KX-TGD520 series: If the base unit is
placed near the monitored handset, we
recommend turning off the base unit ringer
volume (page 14).
Setting the baby monitor
Perform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).
To monitor with a handset
The internal baby monitor feature is available
between handsets in the same radio cell.
1
M
N#268
2
MbN
:
“
On
”
a
M
OK
N
3
MbN
: Select the desired handset number
to monitor with.
a
M
OK
N
R
“
Baby Monitor
”
will be displayed.
R
The registered handset name/number
is displayed.
Note:
R
When this feature is on, another handset
can hear the monitored handset by making
an intercom call.
To monitor from an outside line
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
n
From the phonebook:
1
M
N#268
2
MbN
:
“
On
”
a
M
OK
N
3
MbN
: Select
“
External
”
to monitor
from an outside line.
a
M
N
4
MbN
:
“
Phonebook
”
a
M
OK
N
5
MbN
: Select the phonebook entry.
a
M
OK
N
R
“
Baby Monitor
”
will be displayed.
Note:
R
If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n
By entering phone numbers:
1
M
N#268
2
MbN
:
“
On
”
a
M
OK
N
3
MbN
: Select
“
External
”
to monitor
from an outside line.
a
M
N
4
MbN
:
“
Manual
”
a
M
OK
N
5
Enter the desired name.
a
M
OK
N
6
Enter the desired number.
a
M
OK
N
2
times
R
“
Baby Monitor
”
will be displayed.
Note:
R
The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to
“
On
”
.
1
Press
M
N
on the handset being
monitored.
2
MbN
:
“
On/Off
”
a
M
OK
N
3
MbN
:
“
Off
”
a
M
OK
N
a
M
N
Editing an outside monitoring number
1
Press
M
N
on the handset being
monitored.
2
MbN
:
“
On/Off
”
a
M
OK
N
3
MbN
:
“
On
”
a
M
OK
N
28
Programming
KX-TGD5xxUE(en)_0930_ver020.pdf 28
10/24/2019 1:48:23 PM