Important:
R
If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1
M
MENU
N#238
2
MbN
: Select the desired setting.
a
M
SAVE
N
3
Follow the directions on the display to
complete the operation.
Changing the start and end time
1
M
MENU
N#237
2
Follow the directions on the display to
complete the operation.
Selecting groups to bypass silent
mode
1
M
MENU
N#241
2
MbN
: Select the desired groups.
a
M
SELECT
N
R
“
” is displayed next to the selected
group numbers.
R
To cancel the selected group:
MbN
: Select the group.
a
Press
M
SELECT
N
again. “
” disappears.
3
M
SAVE
N
a
M
OFF
N
Other programming
Changing the handset name
1
M
MENU
N#104
2
Enter the desired name.
a
M
SAVE
N
a
M
OFF
N
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is
“
Off
”
.
1
M
MENU
N#105
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Registering a handset to
the base unit
If for some reason the handset is not
registered to the base unit, re-register the
handset.
1
Handset:
M
MENU
N#130
2
Base unit:
Press and hold
M
LOCATOR
N
for about 5
seconds.
R
If all registered handsets start ringing,
press
M
LOCATOR
N
again to stop, then
repeat this step.
3
Handset:
Press
M
OK
N
, then wait until a long beep
sounds.
Deregistering a handset
1
M
MENU
N#131
R
All handsets registered to the base unit
are displayed.
2
MbN
: Select the handset you want to
cancel.
a
M
SELECT
N
3
MbN
:
“
Yes
”
a
M
SELECT
N
a
M
OFF
N
For assistance, please visit http://shop.panasonic.com/support
25
Programming
TGD51x_OI(en)_1129_ver031.pdf 25
2016/11/29 10:57:38
