To finish intercom, press
M
OFF
N
. To answer
the call, press
M
N
.
Making an intercom call
1
M
N
When 3 or more handsets are
registered:
MbN
: Select the desired unit.
a
M
OK
N
2
When you finish talking, press
M
OFF
N
.
Answering an intercom call
1
Press
M
N
to answer the page.
2
When you finish talking, press
M
OFF
N
.
Turning auto intercom on/off
This feature allows the handset to answer
intercom calls automatically when it is called.
You do not need to press
M
N
. When this
feature is set to
“
On
”
, the monitoring handset
for the baby monitor feature (page 32) will
also answer baby monitor calls automatically.
The default setting is
“
Off
”
.
1
M
MENU
N#273
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
OFF
N
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press
M
MENU
N
for about 3
seconds.
R
To turn key lock off, press
M
N
for about
3 seconds.
Note:
R
Calls to emergency numbers cannot be
made until key lock is turned off.
Power backup operation
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. You can program
“
Power Failure
”
and the default setting is
“
Auto
”
(page 26).
Important:
R
If a handset is not placed on the base unit
when a power failure occurs,
“
Base no
power Press OFF
”
is displayed. After
pressing
M
OFF
N
on the handset, place it on
the base unit to start power backup mode.
R
Power backup mode will not work if the
battery level of the power supplying
handset is
/
.
R
Do not lift the power supplying handset
from the base unit during power backup
mode.
Panasonic Ni-MH battery
performance (supplied batteries)
during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
backup mode: 2 hours max.
– Continuous use of the handset other than a
handset in power backup mode: 3 hours
max.
– Not in use in power backup mode: 3 hours
max.
Making calls during a power
failure
n
When only 1 handset is registered:
1
Lift the handset and dial the phone
number.
17
Making/Answering Calls
TGD32xAL(en)_1103_ver021.pdf 17
3/11/2015 1:59:51 PM
