Setting up
Connections
n
Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the telephone line jack until
you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R
Use only the supplied Panasonic AC
adaptor PNLV226BX.
R
Use only the supplied telephone line cord.
3
4
5
4
1
2
n
Charger
Connect the AC adaptor plug to the unit
until you hear a click.
Connect the AC adaptor to the power
outlet.
Note:
R
Use only the supplied Panasonic AC
adaptor PNLV233BX.
1
2
Battery installation
R
USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R
Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R
Confirm correct polarities (
,
).
1
R
Follow the directions on the display to set
up the unit.
8
Getting Started
TGC2xxCX_(en)_0530_ver002.pdf 8
2014/05/30 15:36:23