Preparation
12
For assistance, please visit http://www.panasonic.com/help
Connections
Connect the AC adaptor cord (
A
) by
pressing the plug firmly (
B
). Connect
the telephone line cord until it clicks into
the base unit and telephone line jack
(
C
).
Base unit
L
Use only the supplied Panasonic AC
adaptor PQLV207.
L
Use only the supplied telephone line
cord. Using another telephone line
cord may not allow the unit to work
properly.
Charger
L
Use only the supplied Panasonic AC
adaptor PQLV209.
Note:
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 6).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 6.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Available for:
KX-TG9372
(120 V AC,
60 Hz)
To single-line
telephone jack
(RJ11C)
C
Hook
A
B
A
(120 V AC, 60 Hz)
Hooks
B
To single-line
telephone
jack (RJ11C)
DSL/ADSL filter
TG936x_OI.book Page 12 Wednesday, January 2, 2008 9:12 AM
