Programming
26
Setting the repeater mode
1
8
y
138
2
{
r
}
: Select the desired setting.
s
M
s
{i
c
}
Note:
L
After turning the repeater mode on or off,
_
is displayed on the handset momentarily.
This is normal and the handset can be used
once
w
is displayed.
Registering the DECT repeater (KX-
A405) to the base unit
Note:
L
Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Press and hold
{x}
for about 5 seconds.
(No registration tone)
L
The next step must be completed
within 90 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the
&
indicator and
w
indicator light
green.
3
Base unit:
To exit the registration mode, press
{x}
.
TG6611_6612HK(e-e).book Page 26 Tuesday, May 24, 2011 3:18 PM
