Programming
31
For assistance, please visit http://www.panasonic.com/help
Block calls without phone number
You can reject a call without phone
number including
“
Out of area
”
,
“
Private caller
”
, or
“
Long
distance
”
.
1
{
MENU
}
i
{
#
}{
2
}{
4
}{
0
}
2
{V}
/
{^}
: Select the desired setting.
i
{
SAVE
}
i
{
OFF
}
Viewing/editing/erasing call block
numbers
1
{
MENU
}
i
{
#
}{
2
}{
1
}{
7
}
2
{V}
/
{^}
: Select the desired entry.
L
To exit, press
{
OFF
}
.
3
To edit a number:
{
EDIT
}
i
Edit the phone number.
i
{
SAVE
}
i
{
OFF
}
To erase a number:
{
ERASE
}
i
{V}
/
{^}
:
“
Yes
”
i
{
SELECT
}
i
{
OFF
}
Note:
L
When editing, press the desired dial
key to add,
{
CLEAR
}
to erase.
L
When viewing,
“
Block w/o num
”
is
displayed if the block calls without
phone number feature is turned on. To
turn the feature off:
{
ERASE
}
i
{V}
i
{
SAVE
}
i
{
OFF
}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L
See page 6 for information on the
available model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1
Handset:
{
MENU
}
i
{
#
}{
1
}{
3
}{
0
}
2
Base unit:
■
KX-TG6511 series: page 3
Press and hold
{
LOCATOR
}
for
about 5 seconds. (No registration
tone)
■
KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3
Press and hold
{
LOCATOR
}
for
about 5 seconds until the
registration tone sounds.
L
If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L
The next step must be completed
within 90 seconds.
3
Handset:
Press
{
OK
}
, then wait until a long
beep sounds.
Note:
L
While registering,
“
Base in
registering
”
is displayed on all
registered handsets.
L
When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
TG6511(e).book Page 31 Wednesday, April 28, 2010 4:35 PM
