Panasonic KX-TG643 Скачать руководство пользователя страница 44

Страница: 44 / 64

Useful Information

For assistance, please visit http://www.panasonic.com/help

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message

Cause/solution

Busy

System busy. Try again

later.

The called unit is in use.

Other units are in use and the system is busy.
Try again later.

The handset you are using is too far from the
base unit. Move closer and try again.

The handset’s registration may have been
canceled. Re-register the handset (page 27).

Check tel line

The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 9).

Use rechargeable

battery.

A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page
5, 7.

Error!!

The handset’s registration has failed. Move
the handset and base unit away from all
electrical appliances and try again.

Invalid

There is no handset registered to the base
unit matching the handset number you
entered.

The handset is not registered to the base unit.
Register the handset (page 27).

No link. Reconnect base

AC adaptor.

The handset has lost communication with the
base unit. Move closer to the base unit and try
again.

Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.

The handset’s registration may have been
canceled. Re-register the handset (page 27).

Requires subscription

to Caller ID.

You must subscribe to a Caller ID service.
Once you receive caller information after
subscribing to a Caller ID service, this
message will not be displayed.

Store V.M. no.

You have not stored the voice mail access
number. Store the number (page 37).

TG643x(e).book Page 44 Monday, December 1, 2008 10:13 AM

Содержание KX-TG643

































































Результаты поиска

Содержание KX-TG643

Отзывы:

Похожие инструкции для KX-TG643

Бренды по названию

Популярные бренды

Panasonic KX-TG643, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG643

Отзывы:

Похожие инструкции для KX-TG643

Бренды по названию

Популярные бренды