Panasonic KX-TG432SK, Руководство по эксплуатации

Страница: 27 / 52

Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
–
“
Out of area
” : The caller dials from
an area which does not provide a Caller
ID service.
– “
Private caller
” : The caller
requests not to send caller information.
– “
Long distance
” : The caller makes a
long distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a
missed call. The display shows
“ Missed
call
” .
Note:
R Even when there are unviewed missed
calls,
“
Missed call
” disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
– Pressing M OFF N on a handset.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
Caller list
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
Viewing the caller list and calling
back
1
MCN CID
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press M N .
To exit, press M OFF N .
Note:
R If the entry has already been viewed or
answered, “
” is displayed.
Editing a caller’s phone number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
1
MCN CID
2
MbN : Select the desired entry.
3
M MENU N a MbN : “
Edit
” a M SELECT N
4
Press M EDIT N repeatedly until the phone
number is shown in the desired format.
5
M N
Caller ID number auto edit feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For assistance, please visit http://shop.panasonic.com/support 27
Caller ID Service