Error messages
Display message
Cause/solution
Call phone company for
your access #
R
You have not stored the voicemail access number.
Store the number (page 34).
Base no power
or
No link. Re-connect base
AC adaptor.
R
Confirm the base unit’s AC adaptor is connected to
the unit and the power outlet correctly.
R
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R
The handset’s registration may have been canceled.
Re-register the handset (page 26).
Busy
R
The called unit is in use.
R
Other units are in use and the system is busy. Try
again later.
R
The handset you are using is too far from the base
unit. Move closer and try again.
Check tel line
R
The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 9).
Error!!
R
Recording was too short. Try again.
Invalid
R
There is no handset registered to the base unit
matching the handset number you entered.
R
The handset is not registered to the base unit.
Register the handset (page 26).
Requires subscription to
Caller ID.
R
You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
Use rechargeable battery.
R
A wrong type of battery such as alkaline or
manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 3, 6.
36
For assistance, please visit http://shop.panasonic.com/support
Useful Information