Panasonic KX-TG3680, Руководство по эксплуатации

Страница: 31 / 64

n From the phonebook:
1
M MENU N#268
2
MbN : “ On ” a M SELECT N
3
MbN : Select “
Outgoing call
” to
monitor from outside. a M ADD N
4
MbN : “
Phonebook
” a M SELECT N
5
MbN : Select the phonebook entry. a
M SAVE N
R “
Baby monitor
” will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n
By entering phone numbers:
1
M MENU N#268
2
MbN : “
On
” a M SELECT N
3
MbN : Select “
Outgoing call
” to
monitor from outside. a M ADD N
4
MbN : “
Manual
” a M SELECT N
5
Enter the desired name. a M OK N
6
Enter the desired number. a M OK N
a M SELECT N
R “
Baby monitor
” will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to
“ On ” .
1
Press M MENU N on the handset being
monitored.
2
MbN : “ On/Off ” a M SELECT N
3
MbN : “
Off
” a M SELECT N a M OFF N
Editing an outside monitoring number
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M SELECT N
3
MbN : “ On ” a M SELECT N
4
MbN : Select the outside line.
5
M MENU N a MbN : “
Edit
” a M SELECT N
6
Edit the name if necessary. a M OK N
7
Edit the phone number if necessary. a
M OK N a M SELECT N
Erasing an outside monitoring
number
1
Press M MENU N on the handset being
monitored.
2
MbN : “ On/Off ” a M SELECT N
3
MbN : “
On
” a M SELECT N
4
MbN : Select the outside line.
5
M MENU N a MbN : “ Erase ” a M SELECT N
6
MbN : “
Yes
” a M SELECT N a M OFF N
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1
Press M MENU N on the handset being
monitored.
2
MbN : “
Sensitivity level
” a
M SELECT N
3
MbN : Select the desired setting. a
M SAVE N a M OFF N
Answering the baby monitor
n
When monitoring with a handset:
Press M / ZN to answer a call.
If you want to respond from the monitoring
unit, press
MDN (Mute).
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to
“
On
” (page 17).
Note:
R If you receive an outside call when
communicating with the monitored handset,
the interrupt tone sounds. To answer the
call, press
M OFF N , then press M / ZN .
n When monitoring from outside:
Answer the call.
For assistance, please visit http://shop.panasonic.com/support 31
Programming
TGL43x(en)_0603_ver101.pdf 31 2016/06/03 17:30:18