Registering a handset to the base unit
1
Handset:
M
N
2
MbN
:
“
Handset Setup
”
a
M
N
3
MbN
:
“
Register H.set
”
a
M
N
4
Base unit:
Press and hold
M
N
for about 5 seconds. (No registration tone)
R
If all registered handsets start ringing, press
M
N
again to stop, then repeat this step.
(KX-TG2712)
R
The next step must be completed within 90 seconds.
5
Handset:
Wait until
“
Enter Base PIN
”
is displayed.
a
Enter the base unit PIN (default:
“
0000
”
).
a
M
N
R
If you forget your PIN, contact an authorised service centre.
R
When the handset has been registered successfully,
stops flashing.
Deregistering a handset
1
M
N
2
MbN
:
“
Base Unit Setup
”
a
M
N
3
335
a
M
N
R
All handsets registered to the base unit are displayed.
4
Enter the desired handset number you want to cancel.
a
M
N
5
MbN
:
“
Yes
”
a
M
N
R
A confirmation tone sounds.
R
The handset does not beep when cancelling its own registration.
6
M
N
Changing the base unit PIN (Personal Identification Number)
Important:
R
If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to
you. If you forget your PIN, contact an authorised service centre.
1
M
N
2
MbN
:
“
Base Unit Setup
”
a
M
N
3
MbN
:
“
Base Unit PIN
”
a
M
N
4
Enter the current 4-digit base unit PIN (default:
“
0000
”
).
5
Enter the new 4-digit base unit PIN.
a
M
N
a
M
N
29
Useful Information
TG2711HK(en-en)_0914_ver002.pdf 29
2012/09/14 14:33:44
