background image

Usef

ul Inform

ation

47

If the Following Appears on Your Display...

The following will be displayed when the unit needs your attention.

Display message

Cause & Remedy

Recharge battery

• The battery needs to be charged. Recharge the 

battery (p. 9).

 Charge for 6h

• The battery has been discharged. The handset will 

not work. Fully charge the battery (p. 9).

No link to base.
Move closer to 
base, try again.

• The handset has lost communication with the base 

unit. Walk closer to the base unit and try again or 
re-register the handset (p. 42).

• Confirm the base unit’s AC adaptor is plugged in.
• Raise the base unit antenna.

Please lift up
and try again.

• A handset button was pressed while the handset 

was on the base unit. Lift the handset and press the 
button again.

    Error!!

• When you tried to re-register the handset, the 

handset and base unit could not link for some 
reason, such as interference from electrical 
appliances. Move the handset and base unit away 
from any electrical appliances and try again.

Phone book full

• When you tried to store an item in the phone book, 

the phone book memory was full. Press 

[OFF]

 to exit 

the programming mode. To erase other items from 
the phone book, see page 32.

System is busy.
Please try again 
later.

• The handset has lost communication with the base 

unit. Walk closer to the base unit and try again.

 Line in use

• A parallel connected telephone is in use.

Store VM access#

• You have not stored the voice mail access number. 

Store the number (p. 33).

PQQX14045ZA.book  47 ページ  2004年2月19日 木曜日 午後3時47分

Содержание KX-TG2313C

























































Отзывы: