Panasonic KX-TG173SK, Руководство по эксплуатации

Страница: 51 / 76

3
MbN : Select the desired phonebook entry.
a M SAVE N a M EXIT N
n By entering a phone number:
1
M MENU N#338
2
MbN : “
Notification to
” a M SELECT N
a M EDIT N
3
Enter the desired name (16 characters
max.).
a M OK N
4
Enter the desired number (24 digits max.).
a M OK N a M SELECT N a M EXIT N
Turning on/off the new message alert setting
Handset / Base unit
1
M MENU N#338
2
MbN : “
On/Off
” a M SELECT N
3
MbN : Select the desired setting. a M SAVE N
4
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Editing the set phone number
Handset
1
M MENU N#338
2
MbN : “
Notification to
” a M SELECT N
3
M MENU N a MbN : “ Edit ” a M SELECT N
4
Edit the name if necessary (16 characters
max.).
a M OK N
5
Edit the phone number if necessary (24 digits
max.).
a M OK N a M SELECT N a M OFF N
Base unit
1
M MENU N#338
2
MbN : “
Notification to
” a M SELECT N a
M EDIT N
3
Edit the name if necessary (16 characters
max.).
a M OK N
4
Edit the phone number if necessary (24 digits
max.).
a M OK N a M SELECT N a M EXIT N
Erasing the set phone number
Handset
1
M MENU N#338
2
MbN : “
Notification to
” a M SELECT N
3
M MENU N a MbN : “ Erase ” a M SELECT N
4
MbN : “
Yes
” a M SELECT N a M OFF N
R The new message alert setting is turned off.
Base unit
1
M MENU N#338
2
MbN : “
Notification to
” a M SELECT N a
M ERASE N
3
MbN : “
Yes
” a M SELECT N a M EXIT N
R The new message alert setting is turned off.
Activating/inactivating the remote access code
to play messages
If you activate this feature, you must enter the
remote access code (page 52) to play the new
message from the new message alert call. This is
so that unauthorized parties cannot listen to your
messages. The default setting is
“
Inactivate
” .
– “
Inactivate
” : You can listen to the message
by pressing 4 to play new messages (without
entering the remote access code).
– “
Activate
” : You must enter your remote
access code and then press 4 to play new
message.
Handset / Base unit
1
M MENU N#338
2
MbN : “
Remote code
” a M SELECT N
3
MbN : Select the desired setting. a M SAVE N
4
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Listening to messages
After you answer the new message alert, you can
listen to the messages as follows.
n When the remote access code is set to
“
Inactivate
”:
Press 4 to play the new message during the
announcement.
n When the remote access code is set to
“
Activate
”:
1
Enter the remote access code (page 52)
during the announcement.
2
Press 4 to play the new message.
Note:
R Within 10 seconds after listening to new
messages, you can press
#9 during the call
For assistance, please visit http://shop.panasonic.com/support 51
Answering System