use the base unit display, phonebook,
one-touch dial, answering system,
speakerphone, Bluetooth functions, etc.)
The base unit display is blank.
–
“
Off
”
(default): You can use the full functions
of the base unit, but battery life is not extended.
The brightness level for the base unit display is
lowered.
Base unit
1
M
MENU
N#150
2
MbN
: Select the desired setting.
3
M
SAVE
N
a
M
EXIT
N
Note:
R
Once the battery saving mode is set to
“
On
”
,
the unit rings with the volume level 1 even if the
ringer volume for the base unit is set to
“
Off
”
to
let you know an incoming call is being received.
Panasonic Ni-MH battery performance
(optional batteries) when operating on backup
battery power
Operation
Saving mode
Off
On
In continuous use
2 hours
max.
7 hours
max.
Not in use (standby)
3 hours
max.
8 hours
max.
Note:
R
Battery performance depends on the type of
batteries.
R
Actual battery performance depends on usage
and ambient environment.
Note when setting up
Note for connections
R
The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
R
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
Note for Ni-MH battery installation
R
Handset:
Use the supplied rechargeable
batteries.
R
Handset/Base unit:
For replacement, we
recommend using the Panasonic rechargeable
batteries noted on page 3, 6.
Note for battery charging
R
It is normal for the handset to feel warm during
charging.
R
Clean the charge contacts of the handset and
charger with a soft and dry cloth once a month.
Before cleaning the unit, disconnect from power
outlets and any telephone line cords. Clean
more often if the unit is exposed to grease, dust,
or high humidity.
Intelligent eco mode
This feature automatically reduces handset power
consumption by suppressing handset transmission
power when the handset is close to the base unit.
R
When this feature is activated,
is
displayed. However, during a cellular call,
is not displayed even though this feature is
activated.
R
Eco mode is turned off when the clarity booster
is activated (page 22).
For assistance, visit www.panasonic.ca/english/support
11
Getting Started
TG153CSK(en)_0422_ver021.pdf 11
2016/04/22 14:54:40
