Preparation
5
Preparation
Connections
Base unit
The base unit can be mounted on the wall, if required.
L
Use only the supplied Panasonic AC adaptor PQLV207CE.
L
Use only the supplied telephone line cord. Using another telephone line
cord may not allow the unit to work properly.
Charger
The charger can be mounted on the wall, if required.
L
Use only the supplied Panasonic AC adaptor PQLV209CE.
Note:
L
Never install telephone wiring during a lightning storm.
L
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
During a power failure
The unit will not work during a power failure. We recommend connecting a
corded-type telephone (without AC adaptor) to the same telephone line or
to the same telephone line jack using a T-adaptor.
To telephone line
(220-240 V AC, 50 Hz)
30 mm
Screws
(Not supplied)
Hooks
Available for:
KX-TG1312/KX-TG1313
(220-240 V AC, 50 Hz)
Hooks
25.2 mm
Screws
(Not supplied)
TG1311_1312_1313EG(e).book Page 5 Tuesday, October 21, 2008 5:04 PM